Bent IG fabrication considerations

Product requires specific production procedures
Joe Erb and Tracy Rogers
June 3, 2010
FABRICATION

 

 

 

Editor’s note: This article is part two of a two-part series, first presented as a paper at the Glass Performance Days Conference in Finland in 2009. This article has been edited for Glass Magazine.

Attached File:
FactoryFloor_Web.pdf

Joe Erb is product manager, Edgetech I.G., and Tracy Rogers is technical director, Edgetech I.G., Cambridge, Ohio. Write them at jerb@edgetechig.com and tgrog@earthlink.net, respectively.