ADVERTISEMENT Salem Fabrication Supplies is a longtime trusted partner of Wood's Powr-Grip™. We stock a broad range of hand-held vacuum cups, vacuum mounting cups and below-the-hook vacuum lifters to make material handling easier –including the Quadra-Tilt™ Rotator 1400.

WE ARE SAFETY. The Quadra-Tilt™ Rotator 1400 features a Dual Vacuum System with two independent air-line circuits to reduce risk of workplace accidents.

WE ARE EFFICIENCY. The Quadra-Tilt™ design enables a single operator to easily move loads between upright and flat positions.

WE ARE PRODUCTIVITY. State-of-the-art Intelli-Grip™ technology, a Wood’s Powr-Grip™ exclusive, oversees power and vacuum systems on the Quadra-Tilt™, increasing productivity and improving safety.

WE ARE SALEM. Whether your application requires standard or custom designs, let Salem and Wood's Powr-Grip™ put our expertise to work for you! Contact Salem today to learn more about our full lines of Material Handling Equipment.  GO BEYOND THE EDGE.

800.234.1982 | info@salemftg.com | www.SalemFTG.com

Salem Fabrication Supplies is a division of Salem Fabrication Technologies Group, Inc.

We Are 100% Employee Owned.

ADVERTISEMENT Salem Fabrication Supplies is a longtime trusted partner of Wood's Powr-Grip™. We stock a broad range of hand-held vacuum cups, vacuum mounting cups and below-the-hook vacuum lifters to make material handling easier –including the Quadra-Tilt™ Rotator 1400.

WE ARE SAFETY. The Quadra-Tilt™ Rotator 1400 features a Dual Vacuum System with two independent air-line circuits to reduce risk of workplace accidents.

WE ARE EFFICIENCY. The Quadra-Tilt™ design enables a single operator to easily move loads between upright and flat positions.

WE ARE PRODUCTIVITY. State-of-the-art Intelli-Grip™ technology, a Wood’s Powr-Grip™ exclusive, oversees power and vacuum systems on the Quadra-Tilt™, increasing productivity and improving safety.

WE ARE SALEM. Whether your application requires standard or custom designs, let Salem and Wood's Powr-Grip™ put our expertise to work for you! Contact Salem today to learn more about our full lines of Material Handling Equipment.  GO BEYOND THE EDGE.

800.234.1982 | info@salemftg.com | www.SalemFTG.com

Salem Fabrication Supplies is a division of Salem Fabrication Technologies Group, Inc.

We Are 100% Employee Owned.

The Autoscreen SAC-845/55 automatic screen mesh and spline insertion machine automates the application of screen mesh and spline to a pre-assembled screen frame. The estimated typical cycle time for an 18- by 18-inch window screen frame is approximately 35 seconds, including all handling. Patio doors measuring up to 48 by 96 inches are processed by the larger SAC-855 Autoscreen, taking approximately 1 minute and 20 seconds to complete, including handling.

The Autoscreen SAC-845/55 automatic screen mesh and spline insertion machine automates the application of screen mesh and spline to a pre-assembled screen frame. The estimated typical cycle time for an 18- by 18-inch window screen frame is approximately 35 seconds, including all handling. Patio doors measuring up to 48 by 96 inches are processed by the larger SAC-855 Autoscreen, taking approximately 1 minute and 20 seconds to complete, including handling.

The MRMC Machining Center can load and index material, fabricate lock dimples and holes, balance fabs, night latch routes, and more while also cutting to length and coping the ends of the profiles. With this product, companies can reduce scrap, improve part quality and ensure worker safety while increasing productivity.

The MRMC Machining Center can load and index material, fabricate lock dimples and holes, balance fabs, night latch routes, and more while also cutting to length and coping the ends of the profiles. With this product, companies can reduce scrap, improve part quality and ensure worker safety while increasing productivity.

Lattuada’s TLR 11 AV C PC H85 is a fully automatic, 11-wheel mitering machine equipped with the company’s A-WR system that offers diamond and resin wheels, automatic pre-setting, polishing wheels, and automatic wear recovery. An i-AL system allows automatic adjustment of the machine’s parameters based on the glass thickness. It is also equipped with a motorized adjustable infeed conveyor, digital ammeters, an automatic alert system for wear on the polishing wheels, and teleservice.

Lattuada’s TLR 11 AV C PC H85 is a fully automatic, 11-wheel mitering machine equipped with the company’s A-WR system that offers diamond and resin wheels, automatic pre-setting, polishing wheels, and automatic wear recovery. An i-AL system allows automatic adjustment of the machine’s parameters based on the glass thickness. It is also equipped with a motorized adjustable infeed conveyor, digital ammeters, an automatic alert system for wear on the polishing wheels, and teleservice.

Viprotron’s Temper Scanner 5D is a complete tempering line measurement system that uses True Edge technology. It scans for all distortion and measures from edge to edge, detecting anisotropy, white haze, scratches and coating defects. Equipped with up to five different inspection channels, this modular scanner combines state-of-the-art technology from five different scanners into one device. The Temper Scanner measures all distortions at the exit of a tempering furnace.

Viprotron’s Temper Scanner 5D is a complete tempering line measurement system that uses True Edge technology. It scans for all distortion and measures from edge to edge, detecting anisotropy, white haze, scratches and coating defects. Equipped with up to five different inspection channels, this modular scanner combines state-of-the-art technology from five different scanners into one device. The Temper Scanner measures all distortions at the exit of a tempering furnace.